discharge section मीनिंग इन हिंदी

उदाहरण वाक्य

1. The Montana flume omits the throat and discharge sections of the Parshall.
2. The point at with the approach and discharge section walls meet is termed the  throat of the Cutthroat flume.
3. Lacking the extended throat and discharge sections of the Parshall flume, Montana flumes are not intended for use under submerged conditions.
4. The short-section Parshall ( sometimes referred to as a USGS or Portable Parshall ) omits the discharge section of the flume.
5. The approach section walls contract uniformly at a 3 : 1 ratio, while the discharge section walls expand at a 6 : 1 ratio.
6. Lacking the extended throat and discharge sections of the Parshall flume, the Montana flume has little resistance to the effects of submergence and as such it should be avoided.
7. With the deletion of the throat and discharge section, the Montana flume has little resistance to submersion and, like the H flume, should be used where free-spilling discharge is present under all flow conditions.
8. Differences between the Venturi and Parshall flume include : reduction of the inlet converging angle, lengthening the throat section, reduction of the discharge divergence angle, and introducing a drop through the throat ( and subsequent partial recovery in the discharge section ).
9. The temperature measurement is critical, and consequently commercial distributors of thermodynamic pump testing equipment often quote an accuracy of greater than 0.001�C . Such accuracy is necessary as the temperature rise across a pump may be less than 0.05�C . Typically, temperature probes are inserted directly into the flow, and pressure measurements are taken from taps on both the suction and discharge sections of the pipe.